Water steel tanks, fire corrugated steel
The table below shows typical dimensions of the containers. We can produce container of any size.
Drain and filler (overflow) tubes placed at a distance of 10 - 15 cm from the lower (upper) edge of the container. Consequently, the working volume of the container less marker 2 - 5% .
For example, a container with a diameter of 11.9 m and and a height of 4.67 m and a volume of 521 m³. Urban water supply and villages water supply of towns and villages
Water supply system of settlements begins with tanks, from which water is supplied to the water treatment system, and then - to consumers. For this purpose, the previously fabricated welded metal containers that after 5 - 10 years are mainly in poor condition. Therefore, to solve the problem of rusty water in the tap is now trying to use plastic containers, including modular.
- Cities, villages with a lack of drinking water.
- Municipalities with a lack of drinking water.
- Municipalities with emergency tanks.
- Municipalities with "aggressive water". Water from wells often contains iron, hydrogen sulfide, which then "cleaned" water treatment. But if the container is not resistant to aggressive substances, then it quickly goes out of service. Plastic modular container liner is resistant to aggressive substances. Containers used for water with a high percentage of hydrogen sulfide.